Solv Sealer Gold provides premium “nano-molecule” protection to low porosity tiles, fine stone and grout. It’s extremely small molecule structure enables it to rapidly penetrate into the fine pores of polished porcelain, dense granite and fine stone whilst being equally effective in providing outstanding protection to grout, slate, sandstone and clay products.
Solvent based
Protects against water & oil contaminants
Provides premium protection for up to 15 years
Colour: Light tan pH: N/A
Safety: Harmful Pack Size: 1Lt, 5Lt, 15Lt
BENEFITS
Precise Chemistry – Solv Sealer Gold is formulated using a precise blend of “nano – small particle” fluorochemical technology with specialist penetrating solvents to achieve a high level of penetration into small-pore, dense substrates.
Premium Protection - provides premium protection against water and oil borne contaminants including;
o food and beverage stains,
o oil & greasy spills,
o biological growth such as mould & mildew,
o efflorescence,
o pollution and weathering
Versatile Application – Solv Sealer Gold’s solvent base chemistry allows almost fool proof application, providing premium protection to a wide range of substrates but with special distinction on fine pore surfaces such as polished stone.
Natural Look – does not alter the natural look of fine stone nor change its surface texture.
Surface Safe – will not etch or cause discolouration of marble or fine stone.
Vapour Permeable – won’t trap moisture. Allows natural stone to “breathe”.
Safe to Use – Solv Sealer Gold does not contain chlorinated hydrocarbons and is not a suspected carcinogen.
SUBSTRATES
• Granite, marble, limestone, travertine and fine stone.
• Terracotta, Saltillo, Quarry and Terrazzo.
• Also provides premium protection to Sandstone and Slate.
• Grout
Expected Wear – Solv Sealer Gold will provide premium protection for up to 15 years. However application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life.
It is recommended that the sealer be re-applied every 5 to 8 years where harsh conditions exist.
HOW TO USE
Preparation
- New installations must be fully cured before application of Solv Sealer Gold (Min 48 hours)
- Existing stone, tile and grout must be totally clean, dry and chemical free.
- Coverage is 10 to 30m2 / Litre per coat. The coverage for the 2nd and 3rd coats is normally significantly higher.
Application:
1. Apply 2 to 3 coats of Solv Sealer Gold by generously saturating the surface using a polish applicator, roller or sprayer.
2. Using a squeegee or/and absorbent towelling or applicator, wipe off any sealer remaining on the surface after 5 to 10 minutes of each application.
3. Allow at least 30 minutes in between coats. Best results are obtained by applying the subsequent coat when the solvent from the previous one has totally evaporated.
4. Keep traffic off for 2 hours. Keep dry for 12 hours. Achieves a full cure in 24-48 hours.
SAFETY
• Flammable according to the Australian Dangerous Goods Code.
• Hazardous according to the criteria of WorkSafe Australia.
• Read and understand the Material Safety Data Sheet before using.
|
