Cuffs and Connectors
Products
Connector 2" - 1.5" Reducing
Used to connect a sections of 1.5" vacuum hose and 2" vacuum hose together. The cuffs slip over the hose barbs on each end and is constructed of a indestructible polymer.
Cool Cuff Adapter 2"
The Adapter is designed to give you a locking connection at your truckmount. Install it permanently with the stainless worm-gear clamp provided. Most guys' hose connections start there at the intake port or clear-view filter thus the starter cuff. Wherever you connect to your truckmount this is where you install the starter cuff. Most guys just hook up to the intake port. If you hook-up to the intake port then your adapter goes there. If you hook-up to a clear-view filter then your adapter goes there. You can install two or more adapters as needed like one on either end of your clearview filter. Just remember to follow the Ladies First rule: when you first roll your vac hoses onto the reel make sure the female part goes onto the reel first (there should already be a male on the hose to screw it to). This way when you get to the job and you strip-off your hoses you've got a female in your hand to screw onto the Adapter. Most truckmounts have a 2" intake port so you just slide on the adapter and tighten down the stainless clamp provided with the adapter. If your machine has a barbed port (Hydramasters and Prochem's etc) you will need to file down the 2" plastic barb a little bit to accept the adapter. It's easy to do with a grinder or file. Some guys run a 2" hose from their waste tank to the van's door and screw on a Male instead of an Adapter. Schematic: Truckmount Outlet a Adapter a F- M a F- M a F- M a Cleaning ToolThe female Swivel makes a good swivel at the 2" wand. Just install an adapter onto the wand then screw onto the adapter. You've got a quality Viton oring seal and to go along with the Twist n Seal connection.
Cool Cuff Female 2"
Features:
• Easy to use - A simple 1/4 turn and it's connected. The latch locks it shut.
• Can't separate - Go up stairs around corners around the reel. It won't come apart.
• Durable - Rugged polypropylene (not vinyl) holds up to years of abuse.
• Looks Cool - It's only about half the length it's ergonomic and the ends are tapered.
• Inexpensive - Costs less than what it replaces: cuffs barb and strap.
• Long lived - Easily outlasts the other connectors you've used.
• Compatible - Threads right onto your vac hoses just like your regular cuffs did.
• Versatile - The original locking cuff system. Seals locks and swivels. Patented.
• Interchangeable - Reduces from 2" to 1 /1/2" with swivel or lock. Your choice.
All Cool Cuffs come with a 100% Satisfaction Guarantee!!
You need one set of Cool cuffs for each section of hose.
And you need the adapter (also called starter cuff) wherever you hook to your truckmount.
• Easy to use - A simple 1/4 turn and it's connected. The latch locks it shut.
• Can't separate - Go up stairs around corners around the reel. It won't come apart.
• Durable - Rugged polypropylene (not vinyl) holds up to years of abuse.
• Looks Cool - It's only about half the length it's ergonomic and the ends are tapered.
• Inexpensive - Costs less than what it replaces: cuffs barb and strap.
• Long lived - Easily outlasts the other connectors you've used.
• Compatible - Threads right onto your vac hoses just like your regular cuffs did.
• Versatile - The original locking cuff system. Seals locks and swivels. Patented.
• Interchangeable - Reduces from 2" to 1 /1/2" with swivel or lock. Your choice.
All Cool Cuffs come with a 100% Satisfaction Guarantee!!
You need one set of Cool cuffs for each section of hose.
And you need the adapter (also called starter cuff) wherever you hook to your truckmount.
